Select a Category:
M281PTZ 2.8″ PTZ CCTV SECURITY TESTER
Discontinued
With UTP cable tester, colour-bar signal generator, CCTV camera video input and more, the M281PTZ is a versatile device for CCTV installers.
With the ability to power, view and control CCTV cameras and adjust their settings via the in-built PTZ controller, you can test each device as it’s installed without anything else being connected! The UTP cable tester and video signal generator means you can find faults in cables before the cameras are installed, speeding up installation.
Features
- 2.8″ TFT-LCD, 960H×240V resolution
- Built-in PAL/NTSC Colour Bar Signal Generator—transmits/receives colour signals
- Automatically identifies NTSC & PAL signals
- Support RS232 and RS485 interface, baud rate adjustable
- PTZ (RS485) Protocol analysis and identification including address scanning
- Support more than ten kinds of PTZ controller protocols
- PTZ Control: Control the status of P/T, zoom camera in/out, adjust the aperture, focus and set parameters, save and recall presets
- Also tests LAN (UTP) cable—measures the connection status and pin sequence
- Lithium Ion Polymer Batteries (3.7V DC 2800mAh)—high capacity and reliable charging
Specifications
| Display area | 2.8″ TFT LCD active matrix |
| Resolutions | 960H×240V |
| Input signal level | 1.0 Vp-p 75ohm |
| Back light type | LED |
| Brightness | 300cd/m2 |
| Baud Rate |
|
| PTZ Protocol |
|
| PTZ Data Test | Capture and Analyze the PTZ data sent from controlling device |
| Signal format | PAL/NTSC |
| Power requirements | 5V DC / 2A |
| Operating temperature | -30°C ~ +70°C |
| Work Humidity | 30% ~ 90% |
| Connection port | 1x BNC input |
| 1x BNC output | |
| 1x RJ45 Jack | |
| 1x Jack for RS232 | |
| Dimensions | 170 x 99 x 48mm |
| Packing size | 260 x 195 x 90 mm |
| Gross weight: | 1.05 kg |
Short URL: https://bit.ly/33fwgqS