Features

• Sony 1/2.8" 2.07 Mega pixel Progressive Scan TWDR Exmor CMOS Sensor
• 2.8-12mm motorized vari-focal lens
  Provides a 92° to 28° view
• Resolution: 2048×1536
• Built-in intelligence
• H.265 encoding
  Compared to H.264, the new H.265 encoding on the Doss CCTV cameras provide 40-50% reduction in bit rate. Which means you get to store more footage without sacrificing video quality!
• T-WDR — True Wide Dynamic Range
  Unlike software based digital WDR implementations, T-WDR is sensor based and provides extremely wide dynamic range
• 0 Lux with IR On
• DSP: HI3516D+IMX123
• 40-50m IR (1x IR Array LEDs)
• Easy setup remote viewing for PC, Mac, iOS, and Android
• MicroSD slot for self-recording
• Vandal proof and IP66 + IK10
  The DMP30IP is extra tough with extra impact protection!
• PoE (Power over Ethernet) DC12V
• SNR: =50db

Our new cameras now feature motorized lenses which means:

• Significantly reduced installation time for each camera
  If you needed to change the zoom on your camera, you’d need to physically adjust the lens using a screwdriver or some other tool. With a motorized lens, it’s all done remotely via software.
• easy recalibration and refocus
  If you need to shift the focus to another area of the image, again, no need to have to go to each camera and manually adjust focus. Simply do it remotely.

Built-in intelligence

The new Doss cameras are smarter. Real smart. Whether you want to make sure a particular object has been removed or not or whether you need to know if a fire has started or not, the new Doss IQ range cameras have it all.

Here are some of the intelligent analysis baked into the cameras:

• Target counting
• Area detection
• Object detection
• Virtual Guard

Connections

• [DC] 12V DC power input
• [RJ45] Ethernet port
• [BNC] Analogue video out

Specifications

FAQ

Are DOSS IP cameras compatible with my NAS?

As long as the surveillance software on your NAS is ONVIF compatible, the DOSS IP cameras should work just fine.

We have successfully tested on both current range of Synology and QNAP NAS models.

Just make sure that you change the port to 8000 which is the default for the ONVIF protocol.

 

The following settings will get your Doss IP cameras to connect to your Synology NAS:

 

The following settings will get your DOSS IP camera to connect to your QNAP Surveillance Station:

 

 

If your media player supports RTSP (Real-Time-Straming Protocol) then you can access the DOSS IP camera range directly.
For VLC, the following URL structure will allow you to stream your IP feed.

rtsp://IP:PORT/ch01.264?ptype=udp
Where IP is your local IP address or host name, and Port is the camera port